Electromagnetic Flow Meter

Electromagnetic Flow Meter

MICRO Electromagnetic Flow Meter, simply known as mag flow meter is a volumetric flow meter which is ideally used for any conductive liquid and other applications that experiences low pressure drop and with appropriate liquid conductivity required.

This flow meter works on Faraday's Law of electromagnetic induction. In a magnetic flow meter, a current is applied to wire coils mounted within or outside the meter body to generate a magnetic field. The liquid flowing through the pipe acts as a conductor and this induces a voltage which is proportional to the average flow velocity. This voltage is detected by sening electrode mounted in the mag flow meter body and sent to a transmitter which calculates the volumetric flow rate based on the pipe dimensions

Media

 Liquids (Conductive)

Conductivity

 ≥5 µs/cm
Viscosity 200 cp max
Line size 15 NB to 600 NB
Excitation Pulsed DC Coil
Type of output 4 … 20 mA DC isolated, Pulse
Display LED 4 digit for Flow rate & 9 digits for total flow
Calibration range As per requirement (Factory recalibrated)
Accuracy ±0.5% of FS (for 20 to 100% flow)
Linearity ±0.5%
Repeatability ±1%
Process Temperature 850C, 1500C max.
Max. Pressure 10 Kg/cm2, max.
Material of construction Lining: Rubber / Teflon (PTFE)
Flange: CS / MS / SS
Electrode: SS 316 / Hestalloy 'C'
Coil Housing: MS / SS 304
Power Supply 24 V DC external / 90-250 V AC, 50 Hz
Power Consumption < 10 VA
Isolation 1.4 KV between Input, Output & power supply
Response Time < 100 m Sec
Temperature coefficient ±0.1% per 0C
Process connection ASA 150 flanged, as per table B
Mounting In-Line (Horizontal / Vertical)
Operating condition Temperature : 0 … 550C
Humidity : 5 to 95% non-condensing
Transmitter Enclosure Aluminium enclosure IP68/IP67
Optional Available features • Communication port – RS 485 supporting MODBUS RTU protocol
• Transmitter enclosure – Flameproof, IP-65, IIA & IIB CMRI certified
Coming soon...

Inquiry Now